Alternator pulley tensioning cap, 911 (65-89) + 911 Turbo (75-89) + 914-6 (70-72)

Our alternator pulley tensioning cap is suitable for use in the following vehicles:

Porsche 911 2.0 L (1965-1968)              

Porsche 911 S 2.0 L (1967-1969)  

Porsche 911 T 2.0 L (1968-1969)

Porsche 911 TU 2.0 L (1968)

Porsche 911 L 2.0 L (1968-1969)            

Porsche 911 E 2.0 L (1969)          

Porsche 911 T 2.2 L (1970-1971)  

Porsche 911 E 2.2 L (1970-1971)            

Porsche 911 E 2.4 L (1972-1973)            

Porsche 911 S 2.2 L (1970-1971)

Porsche 911 S 2.4 L (1972-1973)           

Porsche 911 TV 2.4 L (1972-1973)          

Porsche 911 TE 2.4 L (1972-1973)                             

Porsche 911 TK 2.4 L (USA-CAN) (1973)                              

Porsche 911 Carrera 2.7 L (1973)

Porsche 911 2.7 L (1974-1977)¹             

Porsche 911 S 2.7 L (1974-1977)¹          

Porsche 911 Carrera 2.7 L (1974-1976)¹                     

Porsche 911 Carrera 3.0 L (1976-1977)¹           

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L with Sportomatic transmission (1978-1980)

Porsche 911 Carrera 3.2 L (1984-1989)

Porsche 911 Carrera 3.2 L Turbo-Look (1984)

Porsche 911 Carrera 3.2 L Speedster (1989)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)¹

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)¹

Porsche 911 Turbo 3.3 L Type 930 (1978-1989)

Porsche 914-6 2.0 L (1970-1972)

Porsche 914-6 Sportomatic 2.0 L (1970-1971)

Note:

¹ Except versions for California

This tensioning cap is used during alternator installation to hold the pulley half with the alternator shims in place.

Quantity required per vehicle: 1

Note: this part is sold separately.

During the installation of the cooling fan or the alternator in your 911 or 911 Turbo, you will need the following components:

911.010443F: Alternator pulley shim, 911 (65-89) + 911 Turbo (75-89) + 914-6 (70-72)

911.010443G: Plastic cap for alternator fan nut, 911 / 911 Turbo (82-89)