FUEL INJECTION

Aluminum sealing ring 10x13,5 mm. 911/911 Turbo (78-94/01-12) +Boxster (97-04) +928 + Cayenne (07-)

911.020090E

Qty

0.60 € TTC

0.50 € HT

Our aluminum sealing ring with dimensions of M10 x 13.5 mm. has several uses in the Porsche parts program. Scroll down the application list below to find the required quantities for your vehicle.

1. This sealing ring is used as a sealing ring on the warm-up regulator for the fuel distributor pipe connector in the following vehicles:

    Porsche 911 SC 3.0 L (1978-1983)

    Porsche 911 Turbo 3.3 L (1978-1989)

    Porsche 964 Turbo 3.3 L / 3.6 L (1991-1994)

Quantity required per vehicle in this application: 1

2. This sealing ring is used as a sealing ring on the fuel distributor for the fuel lines with a Banjo fitting that supply fuel to the injectors in the following vehicles:

    Porsche 911 Turbo 3.3 L (1978-1989)

    Porsche 964 Turbo 3.3 L / 3.6 L (1991-1994)

    Porsche 928 4.5 L (1978-1982)
    Porsche 928 S 4.7 L (1980-1983)

Quantities required per vehicle in this application:
-   911 / 964 Turbo : 12
-   928 / 928 S : 16

3. This sealing ring is used as a fuel injector sealing ring in the following vehicles:

    Porsche 911 Turbo 3.3 L (1978-1989)

    Porsche 964 Turbo 3.3 L / 3.6 L (1991-1994)

Quantity required per vehicle in this application: 6

4. This sealing ring is used as a sealing ring on the front fuel pump for the outbound fuel line with a banjo-type fitting in the following vehicles:

    Porsche 911 SC 3.0 L (1978-1983)

    Porsche 911 Turbo 3.3 L (1978-1983)

Quantity required per vehicle in this application: 2

5. This sealing ring is used as a sealing ring on the rear fuel pump for the outbound fuel line with a banjo-type fitting going to the engine in the following vehicles:

    Porsche 911 Turbo 3.3 L (1978-1979)

Quantity required per vehicle in this application: 2

6. This sealing ring is used as a sealing ring for the vacuum line with a banjo fitting from the air injection control valve in the following vehicles in their European version:

    Porsche 911 Turbo 3.3 L (1984-1989)

Quantity required per vehicle in this application: 2

7. This sealing ring is used as a sealing ring for the hollow banjo-type bolt on the turbocharger oil supply line in the following vehicles:

    Porsche 964 Turbo 3.3 L (1991-1992)

Quantity required per vehicle in this application: 1

8. This sealing ring is used as a sealing ring for the turbocharger boost pressure switch located on the charge air cooler in the following vehicles:

    Porsche 964 Turbo 3.3 L / 3.6 L (1991-1994)

Quantity required per vehicle in this application: 1

9. This sealing ring is used as a sealing ring for the fuel pipe fitting on the warm-up regulator in the following vehicles:

    Porsche 928 4.5 L (1978-1982)
    Porsche 928 S 4.7 L (1980-1983)

Quantity required per vehicle in this application: 1

10. This sealing ring is used as a sealing ring for the M10 bolt located on the cam chain tensioner roller housing in the following vehicles:

    Porsche 928 S 4.7 (1985-1986)

Quantity required per vehicle in this application: 1

11. This sealing ring is used as a sealing ring for the camshaft cover bolts in the following vehicles:

    Porsche 928 S4 5.0 L (1987-1991)
    Porsche 928 S4 CS Club-Sport 5.0 L (1988-1989)
    Porsche 928 GT 5.0 L (1989-1991)

    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 12

12. This sealing ring is used as a sealing ring for the screw plug on the engine oil pump housing in the following vehicles:

    Porsche 986 Boxster 2.5 L / 2.7 L (1997-2004)
    Porsche 986 Boxster S 3.2 L (2000-2004)

    Porsche 996 Carrera 3.4 L (1998-1999)
    Porsche 996 Carrera 2 / 4 3.4 L (1999-2001)

    Porsche 996 Carrera 2 / 4 3.6 L (2002-2005)
    Porsche 996 Carrera 4S 3.6 L (2002-2005)

    Porsche 997 Coupé / Cabrio Targa 3.6 L (2005-2008)
    Porsche 997 Coupé S / Cabrio S / Targa S 3.8 L (2005-2008)

Quantity required per vehicle in this application: 1

13. This sealing ring is used as a sealing ring for the M10 screw plugs located on the water pump’s 2 elbow-shaped pipes in the following vehicles:

    Porsche 996 Turbo / GT2 3.6 L (2001-2005)

    Porsche 997 Turbo / GT2 / GT2 RS 3.6 L (2007-2011)
    Porsche 997 Turbo / Turbo S 2nd generation 3.8 L (2010+2011-2012)

    Porsche 996 GT3 / GT3 RS 3.6 L 265 KW / 360 Ch. (1999-2005)
    Porsche 997 GT3 3.6 L (2007-2009)
    Porsche 997 GT3 / GT3 RS 3.8 L (2010-2011)

Quantity required per vehicle in this application: 2

14. This sealing ring is used as a sealing ring for the screw plug on the oil pressure sender adapter on the cylinder head in the following vehicles:

    Porsche 9PA-1 Cayenne S / GTS 4.8 L (2007-2010)
    Porsche 9PA-1 Cayenne Turbo / Turbo S 4.8 L (2007-2010)

    Porsche 92A Cayenne S 4.8 L (2011-2012)
    Porsche 92A Cayenne Turbo 4.8 L (2011-2012)

    Porsche 970 Panamera S / 4S 4.8 L (2010-2012)
    Porsche 970 Panamera 3.6 L (2011-2012)

    Porsche 970 Panamera Turbo 4.8 L (2010-2012)

Quantity required per vehicle in this application: 1

15. This sealing ring is used as a sealing ring for the screw plugs on the cylinder heads in the following vehicles:

    Porsche 9PA-1 Cayenne S / GTS 4.8 L (2007-2010)
    Porsche 9PA-1 Cayenne Turbo / Turbo S 4.8 L (2007-2010)

    Porsche 92A Cayenne S 4.8 L (2011-2012)
    Porsche 92A Cayenne Turbo 4.8 L (2011-2012)

    Porsche 970 Panamera S / 4S 4.8 L (2010-2012)
    Porsche 970 Panamera 3.6 L (2011-2012)

    Porsche 970 Panamera Turbo 4.8 L (2010-2012)

Quantity required per vehicle in this application: 2

16. This sealing ring is used as a sealing ring for the banjo type fittings of the control lines between the wastegates and the turbocharger cycle valves in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 10

17. This sealing ring is used as a sealing ring for the water radiator bleeder valve in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 1

18. This sealing ring is used as a sealing ring for the screw plugs on the left and right tubular engine support mounts in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 2

19. This sealing ring is used as a sealing ring for the left and tight wastegate bleeder pipes with banjo-type fittings in the following vehicles:

     Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 4

Available

Last products

Out of stock

Tell A Friend