Clutch release fork shaft 911 (87-98) + 911 Turbo (89-98) + 996/997 GT2 (-09) + GT3/GT3 RS (99-12)

Our cross shaft for the clutch release fork is used as original equipment on the following vehicle models that are equipped with a manual transmission:

      Porsche 911 Carrera 3.2 L (1987-1989)

      Porsche 911 Carrera 3.2 L Turbo-Look (1987-1989)

      Porsche 911 Turbo 3.3 L (1989) *

      Porsche 964 Carrera 4 3.6 L (1989-1994)

      Porsche 964 Carrera 2 3.6 L (1990-1994)

      Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

      Porsche 964 Carrera 2 / Carrera 4 Turbo-Look 3.6 L (1991-1994)

      Porsche 964 Turbo 3.3 L (1991-1992)

      Porsche 964 Turbo 3.6 L (1993-1994)

      Porsche 993 Carrera 3.6 L (1994-1998)

      Porsche 993 Carrera 4 3.6 L (1995-1998)

      Porsche 993 Carrera RS 3.75 L (1995-1996)

      Porsche 993 Carrera S / 993 Carrera 4S 3.6 L (1996-1998)

      Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

      Porsche 993 Turbo 3.6 L (1995-1998)

      Porsche 993 Turbo S 3.6 L (1997-1998)

      Porsche 996 Turbo 3.6 L (2001-2005)

      Porsche 996 GT2 3.6 L (2001-2005)

      Porsche 997 Turbo 3.6 L (2007-2009)

      Porsche 997 Turbo GT2 3.6 L (2008-2009)

      Porsche 997 Turbo 2ème génération 3.8 L (2010+2012) **

      Porsche 997 Turbo GT2 RS 3.6 L (2011)

      Porsche 996 GT3 3.6 L (1999-2001/2004-2005)

      Porsche 996 GT3 RS 3.6 L (2004)

      Porsche 997 GT3 3.6 L (2007-2009)

      Porsche 997 GT3 3.8 L (2010-2011)

      Porsche 997 GT3 RS 3.8 L (2011)

Notes:

* For vehicles equipped with a Type G50 5-speed transmission from the following transmission numbers onwards:

- 911 Turbo 3.3 L: G 5050 1K00695 >> (1989)

- 911 Turbo 3.3 L with 40 % limited-slip differential: G 5050 2K00539 >> (1989)

** Not useable on the Porsche 997 Turbo S 2^nd generation 3.8 L (2011-2012)

This part is not suitable for vehicles that are equipped with Tiptronic or PDK transmissions.

Quantity required per vehicle: 1