0 products(s) / 0.00 €
Français English espanol
Top > 911 > ACCESSORIES > > Cold start valve, 911 (75-83) + 928 4.5 L (78-82) + 928 S 4.7 L (1983)

Cold start valve, 911 (75-83) + 928 4.5 L (78-82) + 928 S 4.7 L (1983)

Cold start valve, 911 (75-83) + 928 4.5 L (78-82) + 928 S 4.7 L (1983)
911.020061
Qty 
 Last products 484.32 € TTC
403.60 € HT
Buy Now
Our cold start valve is used as original equipment on the following vehicle models that are equipped with the K-jetronic fuel injection system:

    Porsche 911 2.7 L 110 KW / 150 HP. (1974-1975)
    Porsche 911 2.7 L 110 KW / 150 HP. (JPN) (1976)
    Porsche 911 2.7 L 121 KW / 165 HP. (1976-1977)
    
    Porsche 911 S 2.7 L 129 KW / 175 HP. (1974-1975)
    Porsche 911 S 2.7 L 121 KW / 165 HP. (USA/CAN/CAL/JPN) (1976-1977)

    Porsche 911 2.7 L Carrera 129 KW / 175 HP. (USA/CAN) (1974)

    Porsche 911 S Carrera 2.7 L 121 KW / 165 HP.  (USA/CAN) (1975)°     
    Porsche 911 S Carrera 2.7 L 118 KW / 160 HP. (California) (1975)°

    Porsche 911 Carrera 3.0 L 147 KW / 200 HP. (1976-1977)   

° Models equipped with heat exchangers and thermal exhaust reactors

    Porsche 911 SC 3.0 L 132 KW / 179 HP. (1978-1979)
    Porsche 911 SC 3.0 L 138 KW / 188 HP. (1980)
    Porsche 911 SC 3.0 L 150 KW / 204 HP. (1981-1983)

    Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1978-1979)
    Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1980-1983)

    Porsche 928 4.5 L 177 KW / 241 HP. (1978-1982)       
    Porsche 928 4.5 L 169 KW / 230 HP. USA/CAN/JPN (1978-1979)
    Porsche 928 4.5 L 170 KW / 231 HP. USA/CAN/JPN (1980-1982)

    Porsche 928 S 4.7 L 221 KW / 300 HP. (1983)           

Our cold start valve is also used as original equipment on the following vehicle models that are equipped with the L-jetronic fuel injection system:

    Porsche 928 S 4.7 L USA/CAN/JPN 178 KW / 242 HP. (1983-1984)

The cold start valve supplies additional fuel to the engine when starting before the engine has reached its normal operating temperature. A defective cold start valve will be translated into difficult starting and right idling when the engine is cold. 

When replacing the cold start valve in your vehicle, do install a new O-ring reference 911.020062B for the cold start valve flange. Also do check the proper condition (and replace if necessary) the cold start valve support flange reference  911.020062E.

Quantity required per vehicle: 1
 
  Available   Last products   Out of stock
Tell A Friend Tell A Friend
Share



Sauf mention contraire les prix sont indiqués en Euros TTC et hors frais de port.x