|
> > > > > |
Cold start valve flange, 911 (76-77) + 911 SC (78-83) + 928 EUR (78-83) + 928 USA (78-79) |
|
 |
|
 |
Our cold start valve flange is used as original equipment on the following vehicle models equipped with a K-Jetronic fuel injection system:
Porsche 911 2.7 L 110 KW / 150 HP. (JPN) (1976) Porsche 911 2.7 L 121 KW / 165 HP. (1976-1977) Porsche 911 S 2.7 L 121 KW / 165 HP. (USA/CAN/CAL/JPN) (1976-1977)
Porsche 911 Carrera 3.0 L 147 KW / 200 HP. (1976-1977)
Porsche 911 SC 3.0 L 132 KW / 179 HP. (1978-1979) Porsche 911 SC 3.0 L 138 KW / 188 HP. (1980) Porsche 911 SC 3.0 L 150 KW / 204 HP. (1981-1983)
Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1978-1979) Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1980-1983)
Porsche 928 4.5 L 177 KW / 241 HP. (1978-1982) Porsche 928 4.5 L 169 KW / 230 HP. USA/CAN/JPN (1978-1979) Porsche 928 4.5 L 170 KW / 231 HP. USA/CAN/JPN (1980-1982)
Porsche 928 S 4.7 L 221 KW / 300 HP. (1980-1983)
For the K-Jetronic 911’s from 1976-1983, this flange is placed between the cold start valve and the air-fuel mixing unit.
For the K-Jetronic 928’s from 1978 to 1983 this flange is placed between the cold start valve and the intake manifold.
When replacing your cold start valve flange, use a new flange O-ring reference 911.020062C.
For the Porsche 911 and 911 S K-Jetronic from 1974-1975 use the cold start valve flange reference 911.020062D.
Quantity required per vehicle: 1 |
 |
|
 |
Available |
Last products |
Out of stock |
|
 |
|
|
|
 |
|
|
 |
|
 |
|
|
|