0 products(s) / 0.00 €
Français English espanol
Top > 912 > FILTERS AND BELTS > DRIVE BELTS > Copper washer, 12 x 18 mm.

Copper washer, 12 x 18 mm.

Copper washer, 12 x 18 mm.
912.010403A
Qty 
 Available 2.40 € TTC
2.00 € HT
Buy Now

Our copper sealing ring or washer with dimensions of 12 x 18 x 1.5 mm. has 5 different uses in the Porsche parts program:

1. This copper washer is used in the following vehicles as a washer for the oil filter bolt in FRAM type oil filters equipped with a 12 mm. oil filter bolt:

    Porsche 356 (1950-1955)

    Porsche 356 A (1956-1959) *

    Porsche 356 B (1959-1963) *

    Porsche 356 C (1964-1965) *

    Porsche 356 SC (1964-1965)

   Porsche 912 1.6 L (1966-1969)

Notes:

Three different types of air filters were used by Porsche on the 356 and 912 models. Generally speaking all 356 pre-A’s and several of the very first 356 A’s used Mann oil filters that were recognizable by their use of a 100 mm. oil filter bolt. The rest of 356 A’s, and all 356 B’s and 356 C’s were split between the use of Hengst oil filters (fitted with 16 mm. oil filter bolts) and Fram oil filters (equipped with 12 mm. oil filter bolts). In order to determine which oil filter type is used on your 356, measure the oil filter bolt diameter.

When performing an oil change on your vehicle, always replace the oil filter cartridge reference 912.010401. Also do not forget to install a new oil filter gasket reference 912.010402 and a new oil filter copper sealing ring reference 912.010403A or 912.010403B.

* This copper oil filter washer is not used in the Carrera versions of the Porsche 356 equipped with the 4 camshaft Fürhmann engine.

Quantity required per vehicle in this application: 1

2. This copper washer is used in the following vehicles as a washer for the threaded connector placed on the oil line connecting plate that supports the oil pressure sender:

    Porsche 356 (1950-1955)

    Porsche 356 A (1956-1959) *

    Porsche 356 B (1959-1963) *

    Porsche 356 C (1964-1965) *

    Porsche 356 SC (1964-1965)

   Porsche 912 1.6 L (1966-1969)

* This washer for the threaded connector on the oil line connecting plate is not used in the Carrera versions of the Porsche 356 equipped with the 4 camshaft Fürhmann engine.

Quantity required per vehicle in this application: 1

3. This copper washer is used in the following vehicles as a sealing washer for the fuel filter’s lower fuel hose connector:

    Porsche 911 S 2.0 L (1969)

    Porsche 911 E 2.0 L (1969)

    Porsche 911 E 2.2 L (1970-1971)

    Porsche 911 E 2.4 L (1972-1973)

    Porsche 911 S 2.2 L (1970-1971)

    Porsche 911 S 2.4 L (1972-1973)

    Porsche 911 TV 2.4 L (1972-1973)

    Porsche 911 TE 2.4 L (1972-1973)

    Porsche 911 TK 2.4 L (USA-CAN) (1973)

    Porsche 911 Carrera 2.7 L (1973) Engine Type 911.83

    Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1974-1976) Engine Type 911.83

Quantity required per vehicle in this application: 1

4. This copper washer is used in the following vehicles as a sealing washer for the banjo bolt from the incoming fuel line into the air-fuel mixture control unit:

    Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

    Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1976-1977*)

* Models equipped with heat exchangers and thermal exhaust reactors

Quantity required per vehicle in this application: 2 (one washer on each side of the Banjo fitting)

5. This copper washer is used in the following vehicles as a a sealing washer for the oil filter’s lower oil line connector:

    Porsche GT (2004-2006)

Quantity required per vehicle in this application: 1

  Available   Last products   Out of stock
Tell A Friend Tell A Friend
Share

Nous vous conseillons les produits suivants 

Oil filter gasket, 356 (50-65) + 912 (66-69)
Oil filter gasket, 356 (50-65) + 912 (66-69)
 Available   3.84 € TTC
Add to Cart



Sauf mention contraire les prix sont indiqués en Euros TTC et hors frais de port.x