|
> > > > > > |
Electrical fuel pump, 911 T (69-71) + 911 T-V / 911 T-E (72-73) + 914-6 (70-72) |
|
|
|
|
Our Pierburg electrical fuel pump is suitable for the following vehicle models that are equipped with Weber or Zenith carburators:
Porsche 911 T 2.0 L 80 KW/ 109 HP. (1969) * Porsche 911 T 2.0 L 80 KW/ 109 HP. (USA/CAN) (1969) *
Porsche 911 T 2.2 L 92 KW / 125 HP. (1970-1971) ** Porsche 911 TV 2.4 L 96 KW / 131 HP. (1972-1973) ***
Porsche 911 TE 2.4 L 103 KW / 140 HP. (USA/CAN) (1972-1973) ***
Porsche 914-6 2.0 L 81 KW / 110 HP. (1970-1971) Porsche 914-6 2.0 L 81 KW / 110 HP. (USA) (1972) Porsche 914-6 Sportomatic 2.0 L 81 KW / 110 HP. (1970-1971)
Notes :
* Vehicles factory-equipped with Webber 40 mm. carburators. ** Vehicles factory-equipped with Weber or Zenith 40 mm. carburators. *** Vehicles factory-equipped with Weber or Zenith 40 mm. carburators.
This fuel pump is placed in the front of the vehicle for the Porsche 911 T from 1969 to early 1971. From late 1971 onwards for the 911 T this fuel pump is placed in the rear of the car.
Fuel pump features:
Rated voltage : 12 V. Static pressure @ Q= 0 L/h.: 0.27-0.38 bar Volume flow @ 0.10 bar system pressure: 95 L/h. External diameter: 38 mm. Overall length: 133.5 mm. Intake inside diameter: 8 mm. Exit intake diameter: 8 mm. Current consumption: ≤ 2.00 A
Attention:
1. A few 2.0 L 911 T’s from 1969 are factory-equipped with the HARDI fuel pump reference 911.020011.
2. This electrical fuel pump is not used on the 2.4 L Porsche 911 T-K (USA/CAN) 103 KW / 140 HP. from 1972-1973 that is equipped with CIS / K-Jetronic fuel injection. For this vehicle use fuel pump reference 911.020004.
When replacing the fuel pump on your 911, replace the fuel pump rubber shock mounts reference 911.020010A if those are cracked or dried out.
Quantity required per vehicle: 1 |
|
|
|
Available |
Last products |
Out of stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|