Engine oil sump gasket, 356 (50-65) + 912 (66-69)

Our engine oil sump gasket set is used as original factory equipment on the following vehicles:

    Porsche 356 (1950-1955)

    Porsche 356 A (1956-1959) *

    Porsche 356 B (1959-1963) *

    Porsche 356 C (1964-1965) *

    Porsche 356 SC (1964-1965)

    Porsche 912 1.6 L (1966-1969)

Notes:

Two of this engine oil sump gasket are required for your vehicle:

- One gasket is placed between the crankcase and the oil sump screen reference 356.010186A;

- A second gasket is placed between the oil sump screen and the oil sump cover reference 356.010186.

You will therefore need 2 engine oil sump gaskets every time you perform an oil change on your vehicle.

For the Porsche 356 B Super 90 that are set-up for racing, a third engine oil sump gasket is required because the oil sump cover in these vehicles is equipped with an intermediate sump plate located between the oil sump screen and the oil sump cover plate.

For these vehicles, the placement of the oil sump gaskets is as follows:

- One oil sump gasket is placed between the crankcase and the oil sump screen ;

- A second gasket is placed between the oil sump screen and the intermediate plate;

- A third oil sump gasket is placed between the intermediate plate and the lower oil sump cover plate.

These oil sump screens are also included in our lower engine complete seal and gasket set for your Porsche 356 or 912 reference 912.010250C.

* This oil sump gasket set is not used in the Carrera versions of the Porsche 356.

Quantity required per vehicle: 2 (except 356 B Super 90 in racing trim: 3)