Front bumper end seal, upper left or right, 911 (74-89)

Our upper left or right front bumper end seal is used as factory equipment on the following vehicles:

Porsche 911 2.7 L (1974-1977)     

Porsche 911 S 2.7 L (1974-1975)  

Porsche 911 S 2.7 L (1976) (USA-CAN-California-Japan)

Porsche 911 S 2.7 L (1977) (USA-CAN-Japan)

Porsche 911 Carrera 2.7 L 129 KW/175 HP. (1974) (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 121 KW/164 HP. (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 118 KW/160 HP. (Version for California and Japan)

Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1974-1976) Engine Type 911.83

Porsche 911 Carrera 3.0 L (1976-1977)   

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L Sportomatic (1978-1980)

Porsche 911 Carrera 3.2 L (1984-1989)¹

Porsche 911 Carrera 3.2 L Speedster (1989)

* Models equipped with heat exchangers and thermal exhaust reactors

Notes:

¹ This seal is not used on the 911 Carrera Turbo-Look (1984-1989)

This seal mates the upper ends of the left and right bumper side plates (left and right front fender extensions, references 911.080223 and 911.080224) to the bottom ends of the front left and right fenders.

This seal is used on either the left or right side of the vehicle. It is not suitable for turbocharged 911’s. 

Quantity required per vehicle: 2

Note: this part is sold individually.   

To complete the upkeep or restoration of the front bumper area of your 911, we also have the following references available:

911.080262: Front bumper end seal, lower left or right, 911 (74-89)

911.080223: Front bumper side plate (fender extension), left, 911 (74-89)

911.080224: Front bumper side plate (fender extension), right, 911 (74-89)

911.080217: Front bumper lower valance (spoiler) 911 (74-77) + 911 SC (78-83) + 911 Turbo (75-83)

911.080218: Front bumper lower valance (spoiler) 911 Carrera 3.2 L (84-89)

911.080218T: Front bumper lower valance (spoiler) 911 Turbo (84-89)

911.080301: Front bumper bellows, left 911 (74-89) + 911 Turbo (75-83)

911.080302: Front bumper bellows, right 911 (74-89) + 911 Turbo (75-83)

911.080303: M5 locknut for front bumper bellows

N911.080302: Front bumper bellow clip, 911 (74-89) + 911 Turbo (75-83)

911.080210: Front bumper without headlight washers, 911 (74-81) + 911 Turbo (75-81)

911.080210A: Front bumper with headlight washers, 911 (82-89) + 911 Turbo (82-89)

911.080219: Front fender, left, 911 (74-80)

911.080219A: Front fender, left, 911 (81-89)

911.080220: Front fender, right, 911 (74-80)

911.080220A: Front fender, right, 911 (81-89)