heat exchanger, Left or Right, 911 Turbo (75-89)

Our steel heat exchanger is suitable for the following vehicles:

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)*

Porsche 911 Turbo Carrera (CAN) 3.0 L (1975-1977)**

Porsche 911 Turbo 3.3 L Type 930 (1978-1989)

* except for the 930 Turbo 3.0 L (Japan) from 75-77 equipped with thermal reactors.

** except for the 930 Turbo Carrera 3.0 L (USA) from 76-77 equipped with thermal reactors.

This heat exchanger is suitable for installation on the left side as well as on the right side of the vehicle. It is installed on all 930 Turbo except the Turbo Carrera and Turbo versions for the USA and Japan from 1975 to 1977.

Heat exchangers recover heat from the exhaust system in order to provide warm air to the passenger compartment. It is important to verify that your heat exchangers are in good condition to avoid any cabin heat loss or worse still, any exhaust gases being leaked into the passenger compartment heating system.

Quantity required per vehicle: 2

Note: this part is sold separately.

When you install heat exchangers on your 930 Turbo, you will also need the following components:

911.010472A: M8 locknut, 911/911 Turbo (75-89) (6)

911.010472A1: Exhaust bolt, M8 x 40 mm., 911 (75-98) + 911 Turbo (75-94) (6)

911.010479: Allen exhaust barrel nut, 911 (65-98) + 911 Turbo (75-89) + 993 Turbo (95-98) + 914-6 (70-72) (6)

911.010479A: M8 locknut 911/911 Turbo (65-89) (12)

911.010480: Heat exchanger gasket (cylinder head to heat exchanger) 911 (65-83) + 911 Turbo (75-89) + 924 Turbo/GT (79-84) (6)