Inner top protection edge seal, rear quarter window, left / right, Coupé 912 + 911/911 Turbo (65-77)

Our protection edge seal has several uses in the Porsche parts program:

1. This seal is used as an inner top protection or edge seal for the left and right rear quarter windows in the following vehicles in their Coupé versions:

Porsche 911 2.0 L (1965-1968)              

Porsche 911 S 2.0 L (1967-1969)  

Porsche 911 T 2.0 L (1968-1969)

Porsche 911 TU 2.0 L (1968)

Porsche 911 L 2.0 L (1968-1969)            

Porsche 911 E 2.0 L (1969)          

Porsche 912 1.6 L (1966-1969)

Porsche 911 T 2.2 L (1970-1971)  

Porsche 911 E 2.2 L (1970-1971)            

Porsche 911 E 2.4 L (1972-1973)            

Porsche 911 S 2.2 L (1970-1971)

Porsche 911 S 2.4 L (1972-1973)           

Porsche 911 TV 2.4 L (1972-1973)          

Porsche 911 TE 2.4 L (1972-1973)                             

Porsche 911 TK 2.4 L (USA-CAN) (1973)                              

Porsche 911 Carrera 2.7 L (1973) Engine Type 911.83

Porsche 911 2.7 L (1974-1977)     

Porsche 911 S 2.7 L (1974-1975)  

Porsche 911 S 2.7 L (1976) (USA-CAN-California-Japan)

Porsche 911 S 2.7 L (1977) (USA-CAN-Japan)

Porsche 911 Carrera 2.7 L 129 KW/175 HP. (1974) (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 121 KW/164 HP (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 118 KW/160 HP. (Version for California and Japan)

Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1974-1976) Engine Type 911.83

Porsche 911 Carrera 3.0 L (1976-1977)   

* Models equipped with heat exchangers and thermal exhaust reactors

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

This seal is placed around the top edge of the left and right rear quarter windows in the vehicles above.

Quantity required per vehicle in this application: 2 strips of approximately 24 inches (60 cm.) each.

2. This seal is used as a protection or edge seal inside the engine compartment area of the following vehicles (all Coupé, Targa and Cabriolet versions):

Porsche 911 2.7 L (1974-1977)     

Porsche 911 S 2.7 L (1974-1975)  

Porsche 911 S 2.7 L (1976) (USA-CAN-California-Japan)

Porsche 911 S 2.7 L (1977) (USA-CAN-Japan)

Porsche 911 Carrera 2.7 L 129 KW/175 HP. (1974) (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 121 KW/164 HP (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 118 KW/160 HP. (Version for California and Japan)

Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1974-1976) Engine Type 911.83

Porsche 911 Carrera 3.0 L (1976-1977)   

* Models equipped with heat exchangers and thermal exhaust reactors

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L Sportomatic (1978-1980)

Porsche 911 Carrera 3.2 L (1984-1986)

Porsche 911 Carrera 3.2 L Turbo-Look (1984)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

Porsche 911 Turbo 3.3 L Type 930 (1978-1986)

Quantity required per vehicle in this application: 1 strip of approximately 6 inches (15 cm.).

3. This seal is used as a protection or edge seal around the metal cross-panel in the front trunk area of the following vehicles (all Coupé, Targa and Cabriolet versions):

Porsche 993 Carrera (1994-1998)

Porsche 993 Carrera Tiptronic (1994-1998)

Porsche 993 Carrera RS (1995-1996)

Porsche 993 Carrera 4 (1995-1998)

Porsche 993 Carrera Turbo-Look (1996-1998)