Our intermediate
brake line fitting has several uses in the Porsche pats program.
Quantities required per vehicle are given below for
each type of application. See notes for fitting placement.
1. This fitting is used as an intermediate brake line fitting in the following vehicle models:
Porsche 9442.5 L / 2.7 L
(1985-1989) (1)*
Porsche 944 S 2.5 L
(1987-1988) / 944 S-2 3.0 L (1989-1991) (1)*
Porsche 944 Turbo 2.5 L
(1986-1991) / 944 Turbo S 2.5 L (1987-1988) (1)*
* Only for A.B.S. equipped vehicles.
2. This fitting is used as an intermediate rear brake line fitting in the following vehicle
models:
Porsche 356 B / C / SC
(1959-1965) (1)
Porsche 356 B Carrera GS
2000 2.0 L (1962-1963) (1)
Porsche 911 2.0 L (1965-1968) (1)
Porsche 911 S 2.0 L (1967-1968)
(1)
Porsche
911 T / TU / L 2.0 L (1968) (1)
Porsche 912 1.6 L (1966-1968)
(1)
Porsche 911 Carrera 3.2 L (1984-1989)
(1)**
** located between the brake
regulator and the rear brake line
Porsche
914-6 2.0 L (1970-1972) (1)
Porsche
914-4 1.7 L / 1.8 L / 1.8 L Type V / 2.0 L (1970-1976) (1)
Porsche 928 4.5 L (1978-1982) (1)
Porsche Carrera GT 5.0 L (2004-2006) (1)
Porsche 959 2.85 L (1987-1988)
(1)
3. This fitting is used as an intermediate front brake line fitting in the following vehicle
models:
Porsche 964 Carrera 4 3.6
L (1989-1994) (1)***
Porsche 964 Carrera RS /
RS America 3.6 L (1992-1993) (1)***
Porsche 964 Carrera 2 Turbo-Look
3.6 L (1991-1994) (1)***
Porsche 964 Turbo 3.3 L
(1991-1992) / 964 Turbo 3.6 L (1993-1994) (1)***
*** Only for vehicles with the steering wheel to the right
Porsche 968 3.0
L (1992-1995) (1)
Porsche 993 Carrera RS 3.75 L
(1995-1996) (1)
Porsche 993 Carrera 4S 3.6 L
(1996-1998) (1)
Porsche 993
Turbo 3.6 L (1995-1998) / 993 Turbo S 3.6 L (1997-1998) (1)
4. This fitting is used as an intermediate fitting for the oil lines from the wheel-lock control
valve in the following vehicle models:
Porsche 964 Carrera 4 3.6
L (1989-1994) (4)
|