Our large size screw clamp for the air flow sensor boot is used as original equipment in the following vehicles equipped with the K-Jetronic fuel injection system:
Porsche 911 TK 2.4 L (USA/CAN) 103 KW / 140 HP. (1972-1973)
Porsche 911 2.7 L 110 KW / 150 HP. (1974-1975)
Porsche 911 2.7 L 110 KW / 150 HP. (JPN) (1976)
Porsche 911 2.7 L 121 KW / 165 HP. (1976-1977)
Porsche 911 S 2.7 L 129 KW / 175 HP. (1974-1975)
Porsche 911 S 2.7 L 121 KW / 165 HP. (USA/CAN/CAL/JPN) (1976-1977)
Porsche 911 2.7 L Carrera 129 KW / 175 HP. K-Jetronic (USA/CAN) (1974)
Porsche 911 S Carrera 2.7 L 121 KW / 165 HP. K-Jetronic (USA/CAN) (1975)°
Porsche 911 S Carrera 2.7 L 118 KW / 160 HP. K-Jetronic (California) (1975)°
Porsche 911 Carrera 3.0 L 147 KW / 200 HP. (1976-1977)
° Models equipped with heat exchangers and thermal exhaust reactors
Porsche 911 SC 3.0 L 132 KW / 179 HP. (1978-1979)
Porsche 911 SC 3.0 L 138 KW / 188 HP. (1980)
Porsche 911 SC 3.0 L 150 KW / 204 HP. (1981-1983)
Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1978-1979)
Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1980-1983)
In this application this large clamp is used to fasten the airflow sensor rubber boots reference 911.020100, 911.020101, 911.020102 and 911.020103 to the mass air flow metering unit of the vehicles above.
Screw clamp dimensions: Ø 131 x 9 mm.
Quantity required per vehicle in this application: 1
|
 |
|
356
911
912
914
924
928
944
964
968
993
996
997
Boxster
Cayman
Cayenne
Panamera
991
Sport / Racing
Consumables
Car Covers
Books
Boutique
Available
Last products
Tell A Friend
