Our M6 sized locknut has several uses in the exhaust
system of Porsche vehicles:
- as a locknut
to fasten the clamp halves between the wastegate exhaust pipe and the rear
exhaust muffler:
Porsche 911 Turbo 3.0 L Type 930 (1975-1977)
Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)
Porsche 911 Turbo 3.3 L Type 930 (1978-1982)
Quantity required per vehicle in this application: 2
- as the locknut
to fasten the clamp halves between the crossover tube and the intermediate
exhaust flange, this locknut is used in the following vehicles:
Porsche 911 2.7 L (1975-1977)
Porsche 911 S 2.7 L (1975-1977)
Porsche 911 Carrera 3.0 L
(1976-1977)
Porsche 911 SC 3.0 L (1978-1983)
Porsche 911 SC 3.0 L Sportomatic (1978-1980)
Porsche 911 Carrera 3.2 L (1984)
Quantity required per vehicle in this application: 2
- as the locknut
for the wastegate pipe heat shield :
Porsche 911 Turbo 3.0 L Type 930 (1976-1977)
Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)
Porsche 911 Turbo 3.3 L Type
930 (1978-1989)
Porsche
964 Turbo 3.3 L (1991-1992)
Porsche 964 Turbo 3.6 L Type 965 (1993-1994)
Quantity required per vehicle in this application: 2
- as the locknut to fasten the exhaust sealing flange
from the wastegate exhaust pipe to the exhaust collector:
Porsche 944 Turbo (1986-1991)*
Porsche 944 Turbo S
(1987-1988)
* from chassis Number 95GN1
01001 (1986)
Quantity required per vehicle in this application: 2
Note:
cette
pièce est vendue séparément.
During the installation of the crossover pipe on your
naturally-aspirated Porsche 911, you will need the following components: