IGNITION AND TIMING

M8 locknut, 911/911 Turbo (78-98) + 928 (78-95) + 914 (70-76) + 959

911.010489E

Qty

1.90 € TTC

1.58 € HT

Our M8 hex lock nut has several uses in the Porsche parts program. Scroll down the application list below to find the uses and required quantities of this part for your vehicle.

1. This lock nut is used as a lock nut to fasten the two engine crankcase halves in the following vehicles:

    Porsche 911 SC 3.0 L (1978-1983)
    Porsche 911 Carrera 3.2 L (1984-1989)
    Porsche 911 Turbo 3.3 L (1978-1989)

Quantity required per vehicle in this application: 24

2. This lock nut is used as a nut on the right crankcase half in the following vehicles:

    Porsche 911 SC 3.0 L (1978-1983)
    Porsche 911 Carrera 3.2 L (1984-1989)
    Porsche 911 Turbo 3.3 L (1978-1989)

Quantity required per vehicle in this application: 1

3. This lock nut is used to secure the rubber mounts for the engine oil cooler in the following vehicles:

    Porsche 911 SC 3.0 L (1978-1983)
    Porsche 911 Carrera 3.2 L (1984-1989)
    Porsche 911 Turbo 3.3 L (1978-1989)

Quantity required per vehicle in this application: 6

4. This lock nut is used as a lock nut on the transmission support beam in the following vehicles:

    Porsche 911 SC 3.0 L (1978-1983)
    Porsche 911 Carrera 3.2 L (1984-1986)
    Porsche 911 Turbo 3.3 L (1978-1986)

Quantity required per vehicle in this application: 4

5. This lock nut is used to fasten the left and right timing chain cases to the engine block in the following vehicles:

    Porsche 964 Turbo 3.3 L (1991-1992)

Quantity required per vehicle in this application: 5

6. This lock nut is used to fasten the wheel housing panel on the inside of the front right fender in the following vehicles:

    Porsche 964 Carrera 4 3.6 L (1989-1994)
    Porsche 964 Carrera 2 3.6 L (1990-1994)
    Porsche 964 Carrera RS 3.6 L (1992)

    Porsche 964 Turbo 3.3 L (1991-1992)
    Porsche 964 Turbo 3.6 L (1993-1994)

    Porsche 993 Carrera 3.6 L (1994-1998)
    Porsche 993 Carrera 4 3.6 L (1995-1998)

    Porsche 993 Carrera RS 3.75 L (1995-1996)

    Porsche 993 Carrera S / Carrera 4S (1996-1998)

    Porsche 993 Turbo 3.6 L (1995-1998)

Quantity required per vehicle in this application: 3

7. This lock nut is used to secure the A/C condenser frame onto its supporting bracket in the following vehicles:

    Porsche 964 Carrera 4 3.6 L (1989-1994)
    Porsche 964 Carrera 2 3.6 L (1990-1994)
    Porsche 964 Carrera RS 3.6 L (1992)

    Porsche 964 Turbo 3.3 L (1991-1992)
    Porsche 964 Turbo 3.6 L (1993-1994)

    Porsche 993 Carrera 3.6 L (1994-1998)
    Porsche 993 Carrera 4 3.6 L (1995-1998)

    Porsche 993 Carrera RS 3.75 L (1995-1996)
    Porsche 993 Carrera S / Carrera 4S (1996-1998)

    Porsche 993 Turbo 3.6 L (1995-1998)

Quantity required per vehicle in this application: 3

8. This lock nut is used to fasten the retaining metal straps for the left and right exhaust mufflers in the following vehicles:

    Porsche 993 Carrera 3.6 L (1994-1998)
    Porsche 993 Carrera 4 3.6 L (1995-1998)

    Porsche 993 Carrera RS 3.75 L (1995-1996)
    Porsche 993 Carrera S / Carrera 4S (1996-1998)

Quantity required per vehicle in this application: 2

9. This lock nut is used to fasten the retaining metal straps for the central catalytic converter in the following vehicles:

    Porsche 993 Carrera 3.6 L (1994-1998)
    Porsche 993 Carrera 4 3.6 L (1995-1998)

    Porsche 993 Carrera RS 3.75 L (1995-1996)
    Porsche 993 Carrera S / Carrera 4S (1996-1998)

    Porsche 993 Turbo 3.6 L (1995-1998)

Quantity required per vehicle in this application: 2

10. This lock nut is used to fasten the air intake manifold to the cylinder head in the following vehicles:

    Porsche 928 S4 / S4 CS Club Sport 5.0 L (1987-1991)
    Porsche 928 GT 5.0 L (1989-1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 10

11. This nut is used as a lock nut to fasten the bottom reinforcement plate to the engine support beam in the following vehicles:

    Porsche 928 4.5 L (1981-1982)
    Porsche 928 S 4.7 L (1981-1986)
    Porsche 928 S4 / S4 CS Club Sport 5.0 L (1987-1991)
    Porsche 928 GT 5.0 L (1989-1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 4

12. This lock nut is used as a lock nut for the supporting hooks for the intermediate muffler rubber hangers in the following vehicles:

    Porsche 928 S 4.7 L (1986)
    Porsche 928 S4 / S4 CS Club-Sport 5.0 L (1987-1991)
    Porsche 928 GT 5.0 L (1989-1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 4

13. This lock nut is used as a lock nut for the supporting hooks for the rear muffler rubber hangers in the following vehicles:

    Porsche 928 S4 / S4 CS Club Sport 5.0 L (1987-1991)
    Porsche 928 GT 5.0 L (1989-1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 4

14. This lock nut is used to fasten the lower U-joint on the intermediate steering shaft in the following vehicles:

    Porsche 928 4.5 L (1978-1982)
    Porsche 928 S 4.7 L (1980-1986)
    Porsche 928 S4 / S4 CS Club-Sport 5.0 L (1987-1991)
    Porsche 928 GT 5.0 L (1989-1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 3

15. This lock nut is used to fasten the lower and upper U-joints on the intermediate steering shaft in the following vehicles that are equipped with an airbag:

    Porsche 928 S4 / 928 GT 5.0 L (1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 2

16. This lock nut is used as a lock nut to fasten the steering column to the steering column support bracket in the following vehicles that are not equipped with an airbag:

    Porsche 928 4.5 L (1978-1982)
    Porsche 928 S 4.7 L (1980-1986)
    Porsche 928 S4 / S4 CS Club-Sport 5.0 L (1987-1991)
    Porsche 928 GT 5.0 L (1989-1991)
    Porsche 928 GTS 5.4 L (1992-1995)

Quantity required per vehicle in this application: 2

17. This lock nut is used to secure the left and right protective plates of the rear brake rotors in the following vehicles:

    Porsche 928 4.5 L (1978-1982)
    Porsche 928 S 4.7 L (1980-1986)

Quantity required per vehicle in this application: 6 (3 nuts per side)

18. This lock nut is used as a lock nut for the engine lower rubber shock mounts or mounting brackets on the engine carrier beam in the following vehicles:

    Porsche 914-4 1.7 L (1970-1973)
    Porsche 914-4 2.0 L (1973-1976)
    Porsche 914-4 1.8 L (USA/CAL) (1974-1976)
    Porsche 914-4 Type V 1.8 L (1974-1976)

Quantity required per vehicle in this application: 4

19. This lock nut is used as a lock nut for the transmission rear upper shock mounts in the following vehicles:

    Porsche 914-6 2.0 L (1970-1972)
    Porsche 914-6 Sportomatic 2.0 L (1970-1971)

    Porsche 914-4 1.7 L (1970-1973)
    Porsche 914-4 2.0 L (1973-1976)
    Porsche 914-4 1.8 L (USA/CAL) (1974-1976)
    Porsche 914-4 Type V 1.8 L (1974-1976)

Quantity required per vehicle in this application: 4

20. This lock nut is used as a lock nut for the 2 lower engine shock mounts located on the V-shaped engine support bracket in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 4

21. This lock nut is used as a lock nut for the lower transmission shock mount located on the transmission support beam in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 2

22. This lock nut is used to fasten the 2 upper ball joints to the upper left and right steering control arms in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 8

23. This lock nut is used to fasten the 2 lower ball joints to the lower left and right steering control arms in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 4

24. This lock nut is used to fasten the upper front suspension strut mounts in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 6 (3 per side)

25. This lock nut is used to fasten the retaining brackets for the rear sway bar bushings in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 4

26. This lock nut is used to fasten the left and right angled front bumper support braces in the following vehicles:

    Porsche 959 (1987-1988)

Quantity required per vehicle in this application: 4

Available

Last products

Out of stock

Tell A Friend