Main gearshaft ball bearing 911 (87-98) + 911 Turbo (89-98) + 996 Turbo/GT2 + 997 GT2 (-09)

Our transmission main shaft ball bearing is used as original equipment in the following vehicle models:

     Porsche 911 Carrera 3.2 L with 5-speed transmissions (1987-1989)

     Porsche 911 Carrera 3.2 L Turbo-Look with 5-speed transmissions (1987-1989)

     Porsche 911 Turbo 3.3 L with 5-speed transmissions (1989)

     Porsche 964 Carrera 4 3.6 L (1989-1994)

     Porsche 964 Carrera 2 3.6 L (1990-1994)

     Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

     Porsche 964 Carrera 2 / Carrera 4 Turbo-Look 3.6 L (1991-1994)

     Porsche 964 Turbo 3.3 L / 964 Turbo 3.6 L (1991-1994)

     Porsche 993 Carrera 3.6 L (1994-1998)

     Porsche 993 Carrera 4 3.6 L (1995-1998)

     Porsche 993 Carrera RS 3.75 L (1995-1996)

     Porsche 993 Carrera S 3.6 L (1996-1998)

     Porsche 993 Carrera 4S 3.6 L (1996-1998)

     Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

     Porsche 993 Turbo 3.6 L (1995-1998)

     Porsche 993 Turbo S 3.6 L (1997-1998)

     Porsche 996 Turbo / 996 GT2 3.6 L (2001-2005)

     Porsche 996 GT3 3.6 L (1999-2001/2003-2005)

     Porsche 996 GT3 RS 3.6 L (2004)

     Porsche 997 Turbo GT2 RS 3.6 L (2011)

     Porsche 997 GT3 3.6 L (2007-2009)

     Porsche 997 GT3 3.8 L (2010-2011)

     Porsche 997 GT3 RS 3.8 L (2011)

     Porsche 959 2.85 L (1987-1988)

Notes:

This main shaft ball bearing is not useable on vehicles above that are equipped with Tiptronic or PDK transmissions.

This ball bearing is located on the transmission’s main shaft on the shaft’s longest side. Its purpose is to give support to the transmission’s main shaft and its associated gear sets.

For manual transmissions only.

Main shaft ball bearing dimensions: 30 x 62 x 16 mm.

Quantity required per vehicle: 1