Parts kit for the clutch release fork shaft, 911 (87-98) + 911 Turbo (89-98) + 996/997 GT2 (-11)

Our parts kit for the clutch release fork shaft includes the following components:

          911.030038B1: Seal for the clutch release fork shaft x 2;

          911.030038B2: Plastic cap for clutch release fork shaft x 1;

          911.030038B3: Needle bearing, left, for release bearing fork shaft x 1;

          911.030038B4: Needle bearing, right, for release bearing fork shaft x 1;

          911.030038B5: Retainer plate for release bearing fork shaft x 1;

          911.030038B6: Screw for release bearing fork shaft retainer plate x 1;

The operation mechanism for the clutch release bearing fork is made up of small components in the transmission bell housing that are subject to wear, moisture and dust each time the clutch pedal is engaged. This kit will allow you to rebuild your clutch bearing fork mechanism at a lesser cost.

You can order all of the above parts grouped under the reference 911.030038B, or each of these components can be ordered individually by their own reference number.

This parts kit for the clutch release fork shaft is useable on the following vehicle models that are equipped with a manual transmission:

         Porsche 911 Carrera 3.2 L (1987-1989)

         Porsche 911 Carrera 3.2 L Turbo-Look (1987-1989)

         Porsche 911 Turbo 3.3 L (1989) *

         Porsche 964 Carrera 4 3.6 L (1989-1994)

         Porsche 964 Carrera 2 3.6 L (1990-1994)

         Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

         Porsche 964 Carrera 2 / Carrera 4 Turbo-Look 3.6 L (1991-1994)

         Porsche 964 Turbo 3.3 L (1991-1992)

         Porsche 964 Turbo 3.6 L (1993-1994)

         Porsche 993 Carrera 3.6 L (1994-1998)

         Porsche 993 Carrera 4 3.6 L (1995-1998)

         Porsche 993 Carrera RS 3.75 L (1995-1996)

         Porsche 993 Carrera S / 993 Carrera 4S 3.6 L (1996-1998)

         Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

         Porsche 993 Turbo 3.6 L (1995-1998)

         Porsche 993 Turbo S 3.6 L (1997-1998)

         Porsche 996 Turbo 3.6 L (2001-2005)

         Porsche 996 GT2 3.6 L (2001-2005)

         Porsche 997 Turbo 3.6 L (2007-2009)

         Porsche 997 Turbo GT2 3.6 L (2008-2009)

         Porsche 997 Turbo 2^nd generation 3.8 L (2010+2012) **

         Porsche 997 Turbo GT2 RS 3.6 L (2011)

         Porsche 996 GT3 3.6 L (1999-2001/2004-2005)

         Porsche 996 GT3 RS 3.6 L (2004)

         Porsche 997 GT3 3.6 L (2007-2009)

         Porsche 997 GT3 3.8 L (2010-2011)

         Porsche 997 GT3 RS 3.8 L (2011)

Notes:

* For vehicles equipped with a Type G50 5-speed transmission from the following transmission numbers onwards:

- 911 Turbo 3.3 L: G 5050 1K00695 >> (1989)

- 911 Turbo 3.3 L with 40 % limited-slip differential: G 5050 2K00539 >> (1989)

** This metal retainer plate is not useable on the Porsche 997 Turbo S 2^nd generation 3.8 L (2011-2012)

This part is not suitable for vehicles that are equipped with Tiptronic or PDK transmissions.

Kit contents: 9 pieces.

Quantity required per vehicle: 1 kit.