Our piston ring set for 1 piston is used on the following vehicles :
Porsche 911 2.7 L (1974-1977)
Porsche 911 S 2.7 L (1974-1977)
Porsche 911 S 2.7 L Carrera (1975) (USA-CAN-CAL)
Note : This ring set for 1 piston is suitable for 2.7 L engines equipped with the K-Jetronic (or CIS) fuel injection system only.
This 3-piece piston ring set is suitable for the following engine types with K-Jetronic (CIS) fuel injection :
- For the Porsche 911 2.7 L :
Engines Type 911.92, 911.97 (Sportomatic) - 2.7 L and 110 Kw (150 horsepower)
Engines Type 911.41, 911.46 (Sportomatic) - 2.7 L and 110 Kw (150 horsepower)
Engines Type 911.81, 911.86 (Sportomatic) - 2.7 L and 121 Kw (165 horsepower)
- For the Porsche 911 S 2.7 L :
Engines Type 911.93, 911.98 (Sportomatic) - 2.7 L and 129 Kw (175 horsepower)
Engines Type 911.94, 911.99 (Sportomatic) - 2.7 L and 121 Kw (165 horsepower)
Engines Type 911.82, 911.87 (Sportomatic) - 2.7 L and 121 Kw (165 horsepower)
Engines Type 911.42, 911.47 (Sportomatic) - 2.7 L and 110 Kw (150 horsepower)
Engines Type 911.85, 911.90 (Sportomatic) - 2.7 L and 121 Kw (165 horsepower)
Engines Type 911.81, 911.86 (Sportomatic) - 2.7 L and 121 Kw (165 horsepower)
Engines Type 911.84, - 2.7 L and 121 Kw (165 horsepower)
- For the Porsche 911 S 2.7 L Carrera :
Engines Type 911.43, 911.48 (Sportomatic) - 2.7 L and 121 Kw (165 horsepower)
Engines Type 911.44, 911.49 (Sportomatic) - 2.7 L and 118 Kw (160 horsepower)
Piston ring diameter : 90 mm.
Ring thickness : Scraper ring, (compression), groove 1 : 1.5 mm. Scraper ring, (compression), groove 2 : 1.75 mm.
Oil Ring (lubrication), groove 3 : 4 mm.
The lubrication oil ring is coil spring-loaded along its perimeter and has 2 symmetrical bevelled edges.
6 of these piston rings sets are required per vehicle.
Note : this 3-piece piston ring set is sold separately. |