Screw for release bearing fork shaft retainer plate 911 (87-98) + 911 Turbo (89-98) + 996/997 GT2

Our M6 x 16 mm. screw for the release bearing fork cross-shaft retainer plate is used as original equipment on the following vehicle models that are equipped with a manual transmission:

       Porsche 911 Carrera 3.2 L (1987-1989)

       Porsche 911 Carrera 3.2 L Turbo-Look (1987-1989)

       Porsche 911 Turbo 3.3 L (1989) *

       Porsche 964 Carrera 4 3.6 L (1989-1994)

       Porsche 964 Carrera 2 3.6 L (1990-1994)

       Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

       Porsche 964 Carrera 2 / Carrera 4 Turbo-Look 3.6 L (1991-1994)

       Porsche 964 Turbo 3.3 L (1991-1992)

       Porsche 964 Turbo 3.6 L (1993-1994)

       Porsche 993 Carrera 3.6 L (1994-1998)

       Porsche 993 Carrera 4 3.6 L (1995-1998)

       Porsche 993 Carrera RS 3.75 L (1995-1996)

       Porsche 993 Carrera S / 993 Carrera 4S 3.6 L (1996-1998)

       Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

       Porsche 993 Turbo 3.6 L (1995-1998)

       Porsche 993 Turbo S 3.6 L (1997-1998)

       Porsche 996 Turbo 3.6 L (2001-2005)

       Porsche 996 GT2 3.6 L (2001-2005)

       Porsche 997 Turbo 3.6 L (2007-2009)

       Porsche 997 Turbo GT2 3.6 L (2008-2009)

       Porsche 997 Turbo 2ème génération 3.8 L (2010+2012) **

       Porsche 997 Turbo GT2 RS 3.6 L (2011)

       Porsche 996 GT3 3.6 L (1999-2001/2004-2005)

       Porsche 996 GT3 RS 3.6 L (2004)

       Porsche 997 GT3 3.6 L (2007-2009)

       Porsche 997 GT3 3.8 L (2010-2011)

       Porsche 997 GT3 RS 3.8 L (2011)

Notes:

* For vehicles equipped with a Type G50 5-speed transmission from the following transmission numbers onwards:

- 911 Turbo 3.3 L: G 5050 1K00695 >> (1989)

- 911 Turbo 3.3 L with 40 % limited-slip differential: G 5050 2K00539 >> (1989)

** This screw is not used on the Porsche 997 Turbo S 2^nd generation 3.8 L (2011-2012)

This part is not suitable for vehicles that are equipped with Tiptronic or PDK transmissions.

This screw anchors the retainer plate for the clutch release bearing cross shaft to the transmission wall.

Quantity required per vehicle in this application: 1

This screw is also included in our clutch cross shaft bearing parts kit reference 911.030038B.