Secondary gearshaft roller bearing 911 (87-89) + 964 + 993 + 996 + 996 Turbo (01-05) + 996 GT3

Our transmission secondary (pinion) shaft cylindrical roller bearing is used as original equipment in the following vehicle models:

       Porsche 911 Carrera 3.2 L with 5-speed transmissions (1987-1989)

       Porsche 911 Carrera 3.2 L Turbo-Look with 5-speed transmissions (1987-1989)

       Porsche 911 Turbo 3.3 L with 5-speed transmissions (1989)

       Porsche 964 Carrera 4 3.6 L (1989-1994)

       Porsche 964 Carrera 2 3.6 L (1990-1994)

       Porsche 964 Carrera RS / RS America 3.6 L (1992-1994)

       Porsche 964 Carrera 2 / Carrera 4 Turbo-Look 3.6 L (1991-1994)

       Porsche 964 Turbo 3.3 L / 964 Turbo 3.6 L (1991-1994)

       Porsche 993 Carrera 3.6 L (1994-1998)

       Porsche 993 Carrera 4 3.6 L (1995-1998)

       Porsche 993 Carrera RS 3.75 L (1995-1996)

       Porsche 993 Carrera S 3.6 L (1996-1998)

       Porsche 993 Carrera 4S 3.6 L (1996-1998)

       Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

       Porsche 993 Turbo 3.6 L (1995-1998)

       Porsche 993 Turbo S 3.6 L (1997-1998)

       Porsche 996 Turbo / 996 GT2 3.6 L (2001-2005)

       Porsche 996 GT3 3.6 L (1999-2001/2003-2005)

       Porsche 996 GT3 RS 3.6 L (2004)

       Porsche 997 Turbo GT2 RS 3.6 L (2011)

       Porsche 997 GT3 3.6 L (2007-2009)

       Porsche 959 2.85 L (1987-1988)

Notes:

This pinion shaft roller bearing is not useable on vehicles above that are equipped with Tiptronic or PDK transmissions.

This cylindrical roller bearing is located on the transmission’s secondary or pinion shaft in the terminal position next to the shaft’s helical gear. Its purpose is to give support to the transmission’s pinion shaft and its associated gear sets on the differential output side.

For manual transmissions only.

Secondary shaft roller bearing dimensions: 40 x 90 x 23 mm.

Quantity required per vehicle: 1