Set of Textar brake pads

Manufactured in OEM quality to comply with Porsche original equipment specifications, our set of four Textar brake pads is suitable for installation in the front axle of the following vehicles:

Porsche 356 C / SC (1964-1965):

356 C Coupé / Cabrio 1.6 L Engine Type 616/15 1600 C 75 HP. (1964-1965)

356 C Coupé Karmann 1.6 L Engine Type 616/15 1600 C 75 HP. (1964-1965)

356 C Coupé / Cabrio 1.6 L Engine Type 616/16 1600 SC 95 HP. (1964-1965)

356 C Coupé Karmann 1.6 L Engine Type 616/16 1600 SC 95 HP. (1964-1965)

356 C Carrera GS 2.0 L Engine Type 587/2 2000 160 HP. (1964)

Porsche 911 2.0 L (1965-1968)              

Porsche 911 S 2.0 L (1967-1969)  

Porsche 911 T 2.0 L (1968-1969)

Porsche 911 TU 2.0 L (1968)

Porsche 911 L 2.0 L (1968-1969)            

Porsche 911 E 2.0 L (1969)          

Porsche 912 1.6 L (1966-1969)

Porsche 912 E 1.6 L (1976) (USA-CAN)

Porsche 911 T 2.2 L (1970-1971)  

Porsche 911 E 2.2 L (1970-1971)            

Porsche 911 E 2.4 L (1972-1973)            

Porsche 911 S 2.2 L (1970-1971)

Porsche 911 S 2.4 L (1972-1973)           

Porsche 911 TV 2.4 L (1972-1973)          

Porsche 911 TE 2.4 L (1972-1973)                             

Porsche 911 TK 2.4 L (USA-CAN) (1973)                              

Porsche 911 Carrera 2.7 L (1973) Engine Type 911.83

Porsche 911 2.7 L (1974-1977) – M-type caliper 

Porsche 911 S 2.7 L (1974-1975) – M-type caliper                 

Porsche 911 S 2.7 L (1976) (USA-CAN-California-Japan) – M-type caliper      

Porsche 911 S 2.7 L (1977) (USA-CAN-Japan) – M-type caliper

Porsche 911 Carrera 2.7 L 129 KW/175 HP. (1974) (USA-CAN) – M-type caliper

Porsche 911 Carrera 2.7 L (1975-1976*) 121 KW/164 HP. (USA-CAN) – M-type caliper       

Porsche 911 Carrera 2.7 L (1975-1976*) 118 KW/160 HP. (Version for California and Japan) – M-type caliper

Porsche 911 Carrera 2.7 L 155 KW / 209 CH. (1974-1976) Engine Type 911.83– M-type caliper     

Porsche 911 Carrera 3.0 L (1976-1977)   

* Models equipped with heat exchangers and thermal exhaust reactors

Porsche 914-6 2.0 L (1970-1972)

Porsche 914-6 Sportomatic 2.0 L (1970-1971)

Porsche 914 1.7 L (1970-1972)

Additionally, our set of four Textar brake pads is suitable for installation as original Porsche equipment in the rear axle of the following vehicles:

Porsche 911 S 2.0 L (1969)          

Porsche 911 T 2.0 L (1969)

Porsche 911 L 2.0 L (1969)          

Porsche 911 E 2.0 L (1969)          

Porsche 912 1.6 L (1969)

Porsche 912 E 1.6 L (1976) (USA-CAN)

Porsche 911 T 2.2 L (1970-1971)  

Porsche 911 E 2.2 L (1970-1971)            

Porsche 911 E 2.4 L (1972-1973)            

Porsche 911 S 2.2 L (1970-1971)

Porsche 911 S 2.4 L (1972-1973)           

Porsche 911 TV 2.4 L (1972-1973)          

Porsche 911 TE 2.4 L (1972-1973)                             

Porsche 911 TK 2.4 L (USA-CAN) (1973)                              

Porsche 911 Carrera 2.7 L (1973) Engine Type 911.83

Porsche 911 2.7 L (1974-1977)     

Porsche 911 S 2.7 L (1974-1975)  

Porsche 911 S 2.7 L (1976) (USA-CAN-California-Japan)

Porsche 911 S 2.7 L (1977) (USA-CAN-Japan)

Porsche 911 Carrera 2.7 L 129 KW/175 HP. (1974) (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 121 KW/164 HP. (USA-CAN)

Porsche 911 Carrera 2.7 L (1975-1976*) 118 KW/160 HP. (Version for California and Japan)

Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1974-1976) Engine Type 911.83

Porsche 911 Carrera 3.0 L (1976-1977)   

* Models equipped with heat exchangers and thermal exhaust reactors

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L Sportomatic (1978-1980)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

Note: Front and rear brake calipers for your non-turbocharged Porsche 911 or 912 from 1969 to 1977 can be identified by both the bolt spacing distance, that is the measurement from center to center of the holes used to mount the caliper onto the strut assembly, and by the material of its manufacture (steel or aluminum). 3 brake caliper types were offered by Porsche for the 912 and 911 from 1965 to 1977:

1. 'M' Type front and rear brake calipers are made of steel (smaller 2-piece caliper) and have approximately a 3- inch (76.2 mm.), center to center, bolt spacing.

2. 'A' Type front brake calipers are made of steel (larger 2-piece caliper) and have approximately a 3 1/2 inch (89 mm.), center to center, bolt spacing.

3. 'S' Type front brake calipers are made of aluminum (larger single-piece caliper) and have approximately a 3 1/2 inch (89 mm.), center to center, bolt spacing.

Caution : Textar brake pads reference 911.061001 are destined to be installed on Type M steel front and rear brake calipers for the 912 and 911’s in the list above.

Brake pad dimensions:

Thickness [mm] : 14.8

Height [mm] : 56.8

Width [mm] : 61.5

Brake pad profile: See below

These brake pads are not engineered to accept brake pad wear indicators.

Textar brake pads are installed by Porsche as Original Equipment in all vehicles in the list above. These pads comply with Porsche’s original product quality and performance specifications.

Textar produces brake pads for all leading vehicle manufacturers and is synonymous in the aftermarket for:

Original equipment quality

Safety and performance

Excellent braking comfort

Long service life  

Each Textar brake pad model guarantees original equipment quality and has been developped with the following design parameters :

Up to 300,000 kilometers (186,000 miles) of testing

Intensive NVH (Noise, Vibration, Harshness) and comfort engineering tests

Up to 1,000 hours of dynamometer testing

Computerized evaluation of braking performance and wear pattern

Rigorous homologation testing in real life conditions

Set contents: 4 brake pads.