0 products(s) / 0.00 €
Français English espanol
Top > 993 > TRANSMISSION AND CLUTCH > GEARBOX > > Sliding gear assembly int. Ø 33.66 mm. 3rd >4th 993/RS/4/4S(95-)+5th>6th 993+911Turbo/GT2/GT3(95-)

Sliding gear assembly int. Ø 33.66 mm. 3rd >4th 993/RS/4/4S(95-)+5th>6th 993+911Turbo/GT2/GT3(95-)

Sliding gear assembly int. Ø 33.66 mm. 3rd >4th  993/RS/4/4S(95-)+5th>6th 993+911Turbo/GT2/GT3(95-)
911.030155A
Qty 
 Out of stock 1 098.59 € TTC
915.49 € HT
Buy Now

Our transmission sliding gear assembly with interior diameter of 33.66 mm. has two separate uses as original equipment in the Porsche parts program.

1. This gear assembly is used as a transmission sliding gear assembly for the 3rd to 4th gears on the following vehicles that are equipped with a 6-speed manual transmission:

       Porsche 993 Carrera 3.6 L (1995-1998) *

       Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

       Porsche 993 Carrera 4 3.6 L (1995-1998)

       Porsche 993 Carrera S 3.6 L (1996-1998)

       Porsche 993 Carrera 4S 3.6 L (1996-1998)

       Porsche 993 Carrera RS 3.75 L (1995-1996)

Notes:

* - 993 Carrera without limited-slip differential from transmission Number G5021 1005073 onwards (1995-1998) +

- 993 Carrera with 40 % limited-slip differential from transmission Number G5020 2003095 onwards (1995-1998) +

- 993 Carrera USA/CAN/China/Austria without limited-slip differential from transmission Number G5020 1002694 onwards (1995-1998) +

- 993 Carrera USA/CAN/China/Austria with 40% limited-slip differential from transmission Number G5020 2002174 (1995-1998)

This transmission sliding gear assembly which is mounted on the transmission’s main shaft includes the following components:

- Toothed synchro hub (« dog teeth ») +
- slider sleeve +
- compression springs +
- steel balls +
- slider cleats


Not suitable for vehicles with Tiptronic transmissions or for the Porsche 993 Turbo.

Quantity required per vehicle in this application: 1

2. This gear assembly is used as a transmission sliding gear assembly for the 5th to 6th gears on the following vehicles that are equipped with a 6-speed manual transmission:

       Porsche 993 Carrera 3.6 L (1994-1998) *

       Porsche 993 Carrera 4 3.6 L (1995-1998)

       Porsche 993 Carrera RS 3.75 L (1995-1996)

       Porsche 993 Carrera S / Carrera 4S 3.6 L (1996-1998)

       Porsche 993 Carrera 4S 3.6 L (1996-1998)

       Porsche 993 Carrera Turbo-Look 3.6 L (1996-1998)

       Porsche 993 Turbo 3.6 L (1995-1998)

       Porsche 993 Turbo S 3.6 L (1997-1998)

       Porsche 996 Turbo 3.6 L (2001-2005)

       Porsche 996 GT2 3.6 L (2001-2005)

       Porsche 997 Turbo GT2 3.6 L (2008-2009)

       Porsche 997 Turbo GT2 RS 3.6 L (2010-2011)

       Porsche 996 GT3 3.6 L (1999-2001/2004-2005)

       Porsche 996 GT3 RS 3.6 L (2004)

       Porsche 997 GT3 3.6 L (2007-2009)

       Porsche 997 GT3 3.8 L (2010-2011)

       Porsche 997 GT3 RS 3.8 L (2011)

Notes:

This transmission sliding gear assembly which is mounted on the transmission’s pinion (secondary) shaft includes the following components:

- Toothed synchro hub (« dog teeth ») +
- slider sleeve +
- compression springs +
- steel balls +
- slider cleats

Not suitable for vehicles with Tiptronic or PDK transmissions.

Quantity required per vehicle in this application: 1

  Available   Last products   Out of stock
Tell A Friend Tell A Friend
Share



Sauf mention contraire les prix sont indiqués en Euros TTC et hors frais de port.x