Small clamp for airflow sensor boot + throttle housing air intake boot, 911 (72-89) + 924 S + 944

911.020103A

Qty

11.51 € TTC

9.59 € HT

To be kept posted on this product you have to log on

Our screw clamp has two different uses in the Porsche parts program:

1. This clamp is used as the small size clamp to fasten the air flow sensor boot in the following vehicles equipped with the K-Jetronic fuel injection system:

    Porsche 911 TK 2.4 L (USA/CAN) 103 KW / 140 HP. (1972-1973)

    Porsche 911 2.7 L 110 KW / 150 HP. (1974-1975)
    Porsche 911 2.7 L 110 KW / 150 HP. (JPN) (1976)
    Porsche 911 2.7 L 121 KW / 165 HP. (1976-1977)

    Porsche 911 S 2.7 L 129 KW / 175 HP. (1974-1975)
    Porsche 911 S 2.7 L 121 KW / 165 HP. (USA/CAN/CAL/JPN) (1976-1977)

    Porsche 911 2.7 L Carrera 129 KW / 175 HP. K-Jetronic (USA/CAN) (1974)

    Porsche 911 S Carrera 2.7 L 121 KW / 165 HP. K-Jetronic (USA/CAN) (1975)°
    Porsche 911 S Carrera 2.7 L 118 KW / 160 HP. K-Jetronic (California) (1975)°

    Porsche 911 Carrera 3.0 L 147 KW / 200 HP. (1976-1977)

° Models equipped with heat exchangers and thermal exhaust reactors

    Porsche 911 SC 3.0 L 132 KW / 179 HP. (1978-1979)
    Porsche 911 SC 3.0 L 138 KW / 188 HP. (1980)
    Porsche 911 SC 3.0 L 150 KW / 204 HP. (1981-1983)

    Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1978-1979)
    Porsche 911 SC 3.0 L 132 KW / 179 HP. (USA/CAN/JPN) (1980-1983)

In this application this clamp is used to fasten the airflow sensor rubber boots reference 911.020100, 911.020101, 911.020102 and 911.020103 to the throttle body (butterfly) of the vehicles above.

Quantity required per vehicle in this application: 1

2. This clamp is also used as a clamp to fasten the air intake boot in the following vehicles equipped with an L-Jetronic fuel injection system:

    Porsche 911 Carrera 3.2 L 170 KW / 231 HP. (1984-1986)
    Porsche 911 Carrera 3.2 L Turbo-Look 170 KW / 231 HP. (1984-1986)
    Porsche 911 Carrera 3.2 L 152 KW / 207 HP. (USA/CAN/JPN) (1984-1986)

    Porsche 911 Carrera 3.2 L 170 KW / 231 HP. (1987-1989)
    Porsche 911 Carrera 3.2 L with catalytic converter 160 KW / 218 HP. (1987-1989)
    Porsche 911 Carrera 3.2 L Speedster 170 KW / 231 HP. (1989)

    Porsche 924 S 2.5 L 110 KW / 150 HP. (1986-1987)
    Porsche 924 S 2.5 L 118 KW / 160 HP. (1988)

    Porsche 944 2.5 L 120 KW / 163 HP. (1982-1985)
    Porsche 944 2.5 L 110 KW / 150 HP. (USA/CAN/JPN) (1983-1985)

    Porsche 944 2.5 L 120 KW / 163 HP. (1985-1987)
    Porsche 944 2.5 L 110 KW / 150 HP. With catalytic converter (1985-1987)
    Porsche 944 2.5 L 118 KW / 160 HP. (1987-1988)

    Porsche 944 2.7 L 121 KW / 160 HP. (1989)

For the Porsche 911 Carrera above, this clamp fastens the air intake boot reference 911.020104 to the mass airflow sensor 911.020048S.

For the Porsche 924 S and 944 above, this clamp fastens the air intake boot reference N944.020100 to the vehicle’s throttle body unit.

Quantity required per vehicle in this application: 1

Screw clamp dimensions: Ø 85 x 9 mm.

Available

Last products

Out of stock

Tell A Friend