Stainless steel door sill cover set with « 911 » logo, 911 + 911 Turbo (74-98)

Our pair of stainless steel brushed door sill covers engraved with the “911” logo is useable on the following vehicles:

Porsche 911 2.7 L (1974-1977)     

Porsche 911 S 2.7 L (1974-1977)  

Porsche 911 Carrera 2.7 L 129 KW / 175 HP. (1974) (USA-CAN)

Porsche 911 S Carrera 2.7 L (1975-1977*) (USA-CAN)

Porsche 911 S Carrera 2.7 L (1975-1977*) (Version for California and Japan)

Porsche 911 Carrera 2.7 L 155 KW / 209 HP. (1974-1976) 911.83

Porsche 911 Carrera 3.0 L (1976-1977)   

* Models equipped with thermal reactors and heat exchangers

Porsche 911 SC 3.0 L (1978-1983)

Porsche 911 SC 3.0 L Sportomatic (1978-1980)

Porsche 911 Carrera 3.2 L (1984-1989)

Porsche 911 Carrera 3.2 L Turbo-Look (1984)

Porsche 911 Carrera 3.2 L Speedster (1989)

Porsche 964 Carrera 4 (1989-1994)                                    

         Porsche 964 Carrera 2 (1990-1994)

Porsche 964 Carrera 2 Tiptronic (1990-1994)                        

         Porsche 964 Carrera 2 Speedster (1993-1994)

         Porsche 964 Carrera RS M003 Club-Sport Version (1992)

         Porsche 964 Carrera RS M002 Touring Version (1992)

         Porsche 964 Carrera RS America (USA-CAN) (1992-1993)

         Porsche 964 Carrera 2 Turbo-Look (1992-1994)

         Porsche 964 Carrera 4 Turbo-Look (1991-1994)    

Porsche 993 Carrera (1994-1998)

Porsche 993 Carrera Tiptronic (1994-1998)

Porsche 993 Carrera RS (1995-1996)

Porsche 993 Carrera 4 (1995-1998)

Porsche 993 Carrera Turbo-Look (1996-1998)

Porsche 993 Carrera S (1997-1998)

Porsche 993 Carrera 4S (1996-1998)

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1975-1977)

Porsche 911 Turbo 3.3 L Type 930 (1978-1989)

Porsche 964 Turbo 3.3 L (1991-1992)                        

         Porsche 964 Turbo 3.6 L Type 965 (1993-1994)

Porsche 993 Turbo (1995-1998)

Porsche 993 Turbo S (1997-1998)

These scuff plates will improve the looks of your vehicle while protecting your door sills against scratches, dents and premature wear.

These scuff plates are easy to install, are fitted with strong adhesive strips and require no drilling. They also carry the Porsche «911» logo.

Installation procedure:

Start by first removing the original rubber door sills. Be certain to remove all traces of glue left from the original door sill covers before installing the stainless steel door sill protectors. You can glue the new protectors to the sills in the same position that the original covers were located by removing the strip that covers the two-face adhesive bands on the metal scuff plates. Trial fit the sill protectors before gluing them to ensure best fit. Place them at a location that ensures maximum contact between the door sill frame and the metal scuff plates. Avoid warping the metal protectors during installation.

Quantity recommended per vehicle: 1 set.

Note: this 2-piece set is sold separately. 

In order to protect the inside of the passenger compartment of your 911 or 911 Turbo, we also recommend the following accessories:

911.130001: Original 4-piece floor carpet cover set, black, 912 Coupé + 911 Coupé (65-89)

911.130002: Original 4-piece floor carpet cover set, black, 911 Targa + Cabriolet (67-89)

911.130003: Original 4-piece floor carpet cover set, black, 964 + 993 (89-98)