Textar brake pads

Manufactured in OEM quality to comply with Porsche original equipment specifications, our set of four Textar brake pads is suitable for installation in the rear axle of the following vehicles:

Porsche 356 C / SC (1964-1965):

356 C Coupé / Cabrio 1.6 L Engine Type 616/15 1600 C 75 HP. (1964-1965)

356 C Coupé Karmann 1.6 L Engine Type 616/15 1600 C 75 HP. (1964-1965)

356 C Coupé / Cabrio 1.6 L Engine Type 616/16 1600 SC 95 HP. (1964-1965)

356 C Coupé Karmann 1.6 L Engine Type 616/16 1600 SC 95 HP. (1964-1965)

356 C Carrera GS 2.0 L Engine Type 587/2 2000 160 HP. (1964)

Porsche 911 2.0 L (1965-1968)              

Porsche 911 S 2.0 L (1967-1968)  

Porsche 911 T 2.0 L (1968)

Porsche 911 TU 2.0 L (1968)

Porsche 911 L 2.0 L (1968)          

Porsche 912 1.6 L (1966-1968)

Note: Front and rear brake calipers for your non-turbocharged Porsche 911 or 912 from 1969 to 1977 can be identified by both the bolt spacing distance, that is the measurement from center to center of the holes used to mount the caliper onto the strut assembly, and by the material of its manufacture (steel or aluminum). 3 brake caliper types were offered by Porsche for the 912 and 911 from 1965 to 1977:

1. 'M' Type front and rear brake calipers are made of steel (smaller 2-piece caliper) and have approximately a 3- inch (76.2 mm.), center to center, bolt spacing.

2. 'A' Type front brake calipers are made of steel (larger 2-piece caliper) and have approximately a 3 1/2 inch (89 mm.), center to center, bolt spacing.

3. 'S' Type front brake calipers are made of aluminum (larger single-piece caliper) and have approximately a 3 1/2 inch (89 mm.), center to center, bolt spacing.

Caution : Textar brake pads reference 911.061001A are destined to be installed on Type M steel rear brake calipers for the 912 and 911’s (65-68) in the list above.

Brake pad dimensions:

Thickness [mm] : 14.2

Height [mm] : 53.5

Width [mm] : 55.5

Brake pad profile: See below.

These brake pads are not engineered to accept brake pad wear indicators.

Textar brake pads are installed by Porsche as Original Equipment in all vehicles in the list above. These pads comply with Porsche’s original product quality and performance specifications.

Textar produces brake pads for all leading vehicle manufacturers and is synonymous in the aftermarket for:

Original equipment quality

Safety and performance

Excellent braking comfort

Long service life  

Each Textar brake pad model guarantees original equipment quality and has been developped with the following design parameters :

Up to 300,000 kilometers (186,000 miles) of testing

Intensive NVH (Noise, Vibration, Harshness) and comfort engineering tests

Up to 1,000 hours of dynamometer testing

Computerised evaluation of braking performance and wear pattern

Rigorous homologation testing in real life conditions

Set contents: 4 brake pads.

For the maintenance or the rebuild of the front and rear brakes of your 912 or 911 do not forget to check out our other BRAKE COMPONENTS sections. We also have the following parts available for purchase:  

911.060008: ATE DOT 4 brake fluid, 1 L container

911.060009S1: Aviation-type stainless steel braided brake hose kit – single circuit 911 (65-67) + 912 (65-67)

911.060009S2: Aviation-type stainless steel braided brake hose kit –double circuit 911/912 (68-89) +911 Turbo (75-89)

911.061104: Brake cleaning fluid, (500 ml.)