Textar front brake pads

Manufactured in OEM quality to comply with Porsche original equipment specifications, our set of four Textar brake pads reference 911.061000B is suitable for installation in the front axle of the following vehicles:

 

Porsche 911 S 2.0 L (1969)

 

Porsche 911 T 2.2 L (1970-1971) – with Type S brake calipers 

Porsche 911 E 2.2 L (1970-1971) – with Type S brake calipers           

Porsche 911 E 2.4 L (1972-1973) – with Type S brake calipers           

Porsche 911 S 2.2 L (1970-1971)

Porsche 911 S 2.4 L (1972-1973)           

        

Porsche 911 Carrera 2.7 L (1973) Engine Type 911.83

 

Porsche 911 2.7 L (1974-1977) – with Type S brake calipers    

Porsche 911 S 2.7 L (1974-1975) – with Type S brake calipers 

Porsche 911 S 2.7 L (1976) (USA-CAN-California-Japan) – with Type S brake calipers

Porsche 911 S 2.7 L (1977) (USA-CAN-Japan) – with Type S brake calipers

Porsche 911 Carrera 2.7 L 129 KW/175 HP. (1974) (USA-CAN) – with Type S brake calipers

Porsche 911 Carrera 2.7 L (1975-1976*) 121 KW/164 HP. (USA-CAN) – with Type S brake calipers

Porsche 911 Carrera 2.7 L (1975-1976*) 118 KW/160 HP. (Version for California and Japan) – with Type S brake calipers

 

Porsche 911 Carrera 2.7 L 155 KW / 209 CH. (1974-1976) Engine Type 911.83

 

* Models equipped with heat exchangers and thermal exhaust reactors

 

Porsche 911 Turbo 3.0 L Type 930 (1975-1977)

Porsche 911 Turbo Carrera (USA-CAN) 3.0 L (1976-1977)

 

 

Note: Front and rear brake calipers for your non-turbocharged Porsche 911 or 912 from 1969 to 1977 can be identified by both the bolt spacing distance, that is the measurement from center to center of the holes used to mount the caliper onto the strut assembly, and by the material of its manufacture (steel or aluminum). 3 brake caliper types were offered by Porsche for the 912 and 911 from 1965 to 1977:

 

1. 'M' Type front and rear brake calipers are made of steel (smaller 2-piece caliper) and have approximately a 3- inch (76.2 mm.), center to center, bolt spacing.

 

2. 'A' Type front brake calipers are made of steel (larger 2-piece caliper) and have approximately a 3 1/2 inch (89 mm.), center to center, bolt spacing.

 

3. 'S' Type front brake calipers are made of aluminum (larger single-piece caliper) and have approximately a 3 1/2 inch (89 mm.), center to center, bolt spacing.

 

Caution : Textar brake pads reference 911.061000B are destined to be installed on Type S aluminum front brake calipers for the 911’s in the list above (from 1975 to 1977).

 

Brake pad dimensions:

Thickness [mm] : 19.0

Height [mm] : 70.2

Width [mm] : 76.7

 

Brake pad profile:

 

These brake pads are not engineered to accept brake pad wear indicators.

 

Textar brake pads are installed by Porsche as Original Equipment in all vehicles in the list above. These pads comply with Porsche’s original product quality and performance specifications.

 

Textar produces brake pads for all leading vehicle manufacturers and is synonymous in the aftermarket for:

 

Original equipment quality

Safety and performance

Excellent braking comfort

Long service life  

 

Each Textar brake pad model guarantees original equipment quality and has been developped with the following design parameters:

 

Up to 300,000 kilometers (186,000 miles) of testing

Intensive NVH (Noise, Vibration, Harshness) and comfort engineering tests

Up to 1,000 hours of dynamometer testing

Computerised evaluation of braking performance and wear pattern

Rigorous homologation testing in real life conditions

 

Set contents: 4 brake pads.

For the maintenance or the rebuild of the front and rear brakes of your 911 or 911 Turbo do not forget to check out our other BRAKE COMPONENTS sections. We also have the following parts available for purchase:  

 

911.060008: ATE DOT 4 brake fluid, 1 L container

911.060009S2: Aviation-type stainless steel braided brake hose kit –double circuit 911/912 (68-89) +911 Turbo (75-89)

911.061104: Brake cleaning fluid, (500 ml.)