0 products(s) / 0.00 €
Français English espanol
Top > 993 > AIR INTAKE AND FUEL SYSTEM > RUBBER COUPLINGS AND SLEEVES > Water thermostat, 87°C 924 (76-85) + 924 Turbo (79-84) + 924 GT (1981)

RUBBER COUPLINGS AND SLEEVES

Water thermostat, 87°C 924 (76-85) + 924 Turbo (79-84) + 924 GT (1981)

Water thermostat, 87°C 924 (76-85) + 924 Turbo (79-84) + 924 GT (1981)
924.010235
Qty 
 Last products 72.00 € TTC
60.00 € HT
Buy Now
Our water thermostat set at 87°C (189°F) is used as original equipment on the following vehicle models:  

    Porsche 924 (1976-1979)
    Porsche 924 Turbo (1979)

    Porsche 924 (1980-1985)
    Porsche 924 Turbo (1980-1984)
    Porsche 924 Carrera GT (1981)

This water thermostat is a temperature-controlled valve that isolates the cooling liquid in the radiator circuit from the cooling liquid in the engine block until the latter achieves its optimal working temperature. The opening and closing temperature threshold for this thermostat is set at 87°C (189°F). Below this water temperature, the thermostat is closed to allow the engine to warm up to its optimum working temperature and minimize cold engine wear. This is especially important after a cold engine start. Above 87°C the valve opens to allow coolant from the radiator circuit to mix with the coolant in the engine block to keep it at an ideal operating temperature under different engine loads.

It is important to replace the water thermostat in your 924 should your engine have trouble keeping its optimum working temperature. Should the thermostat fail in the closed position, the engine risks over-heating. Should the thermostat fail in the open position, the engine will take much longer to reach operating temperature and premature engine wear will result.

Quantity required per vehicle: 1

  Available   Last products   Out of stock
Tell A Friend Tell A Friend
Share



Sauf mention contraire les prix sont indiqués en Euros TTC et hors frais de port.x